 |
Sealcon CF25DA-BR high quality nickel plated brass cord grip with elongated thread is designed for the toughest applications. Also known as Hummel 1.623.2500.30. Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: M25 x 1.5
- Cable O.D. Range: .51" - .71" (13 - 18 mm)
- Through Hole Diameter: .98" (25 mm)
- Body Length: 4.37" (111 mm)
- Thread Length: .47" (12 mm)
- Wrench Flat Dome: 1.18" (30 mm)
- Wrench Flat Body: 1.18" (30 mm)
Features
- Nickel Plated Brass Material with Stainless Steel Spring, Buna-N Seal & Nylon 6/6 Splined Bushing
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- VDE
Sealcon M25 x 1.5 Metric Nickel Plated Brass strain relief fittings are made to help customers in different industries connect cable or wire to a wide number of applications. Also known as a cord grip or cable gland, it carries a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. The CF25DA-BR lets you change cable opening size by switching out the standard and reduced inserts. The self locking ACME thread on the flex top makes sure that the overlapping splines apply an even seal. This prevents the form seal from being pulled out of the fitting. It also provides pull-out protection for your cable without causing damage. Cable kinking or chafing is eliminated by using the flex nut. Elongated threads are typically used when the cord grip goes through a thick wall, or simply if a longer thread length serves the application more efficiently.
Note: Contact us about purchasing individual standard or reduced inserts
|
|
|
