 |
Sealcon CF20DR-BR high quality nickel plated brass cord grip with elongated thread is designed for the toughest applications. Also known as Hummel 1.623.2000.31. Sold Individually. Locking nut sold separately
Specifications
- Thread Size: M20 x 1.5
- Cable O.D. Range: .20" - .35" (5 - 9 mm)
- Through Hole Diameter: .79" (20 mm)
- Body Length: 3.46" (88 mm)
- Thread Length: .39" (10 mm)
- Wrench Flat Dome: .87" (22 mm)
- Wrench Flat Body: .87" (22 mm)
Features
- Nickel Plated Brass Material with Stainless Steel Spring, Buna-N Seal & Nylon 6/6 Splined Bushing
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- VDE
Sealcon M20 x 1.5 Metric Nickel Plated Brass cord grips, also known as strain relief fittings or cable glands, are used in nearly any industry to help customers connect cable or wire to their applications. This fitting has a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. The CF20DR-BR lets you increase or decrease the cable opening by changing out the standard or reduced inserts. The self locking ACME thread on the flex top makes sure that the overlapping splines provide a concentric seal. This prevents the form seal from being pulled out of the fitting. It also provides pull-out protection for your cable without causing damage. Cable kinking or chafing is eliminated by using the flex nut. Elongated threads are used when the cable gland goes through a thick wall, or simply if a longer thread length better serves the application.
Note: Contact us about purchasing individual standard or reduced inserts
|
|
|
