 |
Sealcon CF20DA-BR high quality nickel plated brass cord grip is liquid tight to 150 psi. Elongated M20 x 1.5 Metric Thread, Accommodates .24" - .47" (6 - 12 mm) O.D cable. Sold Individually. (Locking nut sold separately) Also known as Hummel # 1.623.2000.30
|
Thread Size/Type
|
M20 x 1.5
|
- Nickel Plated Brass Material with Stainless Steel Spring, Buna-N Seal & Nylon 6/6 Splined Bushing
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
|
|
Through Hole Dia.
|
.79" (20 mm)
|
|
Body Length
|
3.46" (88 mm)
|
|
Thread Length
|
.39" (10 mm)
|
|
Wrench Flat Dome/Body
|
.87" (22 mm)
|
Sealcon M20 x 1.5 Metric Nickel Plated Brass cable glands, also referred to as strain relief fittings or cord grips, are used in almost any industry to help customers connect cable or wire to different applications. This fitting has a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. The CF20DA-BR lets you increase or decrease the size of the cable opening just by changing out the standard or reduced inserts. The self locking ACME thread on the flex top ensures that the overlapping splines provide a concentric seal. This prevents the form seal from being pulled out of the fitting. It also provides your cable with pull-out protection without causing damage. Cable kinking or chafing is eliminated by using the flex nut. Cord grips with elongated threads are used when they need to go through a thick wall, or simply if a longer thread length serves the application better. Note: Contact us about purchasing individual standard or reduced inserts
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- VDE
|
|
|
