Sealcon CD63MA-EX high quality EMI/RFI Proof nickel plated brass cord grip for hazardous locations is liquid tight to 150 psi. Metric M63 x 1.5 thread, Accommodates 1.46" - 1.73" (37 - 44 mm) O.D cable. Sold Individually.
(Locking nut sold separately) Also known as Hummel #1.616.6300.50
|
Thread Size/Type
|
M63 x 1.5
|
- Nickel Plated Brass Material with Buna-N Seal, Polyamide Clamping Insert & Buna-N O-Ring
- International Approvals - ATEX, CE, CSA, and German Lloyd
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
|
|
Through Hole Dia.
|
2.48" (63 mm)
|
|
Body Length
|
1.5" (38 mm)
|
|
Thread Length
|
.39" (10 mm)
|
|
Wrench Flat Dome/Body
|
2.52" (64 mm) / 2.68" (68 mm)
|
Sealcon M63 x 1.5 nickel plated brass hazardous location (Hazloc) cable glands are used in applications that require exceptional performance and fire resistance, which is done without twisting the cable. This fitting provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. Increase modularity by trading out the standard or reduced inserts. The self locking ACME thread on the dome top makes sure the overlapping splines provide an even seal. This keeps the form seal from being pulled out of the cord grip & gives pull out protection to your cable so it causes no damage. Note: Contact us about purchasing individual standard or reduced inserts
EMI/RFI Proof cable glands meet the standards for electromagnetic interference protection and reliable grounding. This standard version presses braiding against the inside wall via the integrated O-Ring. It can only be used with a braided shield. Plant equipment, control panels, railroads, and measuring and feedback systems are all applications that benefit from this type of cord grip. Hazardous location strain relief fittings are ATEX approved, as they are designed for potentially explosive environments. The CD63MA-EX is labeled Ex-e, for greater safety
Sealcon CD63MA-EX M63 Hazardous Location Strain Relief Fittings
