 |
Sealcon ED13NA-GY high quality gray nylon snap elbow cord grip is designed for the toughest applications. Also known as Hummel 1.313.1200.70. Sold Individually.
Locking nut & O-Ring sold separately
Specifications
- Thread Size: 1/2" NPT
- Cable O.D. Range: .24" - .47" (6 - 12 mm)
- Through Hole Diameter: .83" (21.1 mm)
- Body Length: 2.24" (57 mm)
- Height: 1.20" (30.5 mm)
- Thread Length: .51" (13 mm)
- Wrench Flat Dome: .94" (24 mm)
- Wrench Flat Body: .94" (24 mm)
Features
- Nylon 6/6 Material with Buna-N Seal
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Vibration Resistant Dome
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
- Can be compatible with Woodhead 5527 (Cable O.D. 0.312"-0.375") & 5529 (Cable O.D. 0.375"-0.437")
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
Sealcon 1/2" NPT Nylon / Plastic Strain Relief Fittings, Cord Grips, and cable glands are used in many industries to help customers when attaching cable or wire to their different applications. This cord grip provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. The ACME thread on the dome top is self-locking, so the
ED13NA-GY cable gland provides a substantial amount of Pull-out resistance by providing an even force on all points of the cable. The standard and reduced inserts can be switched out to change the size of the cable opening, which increases adaptability. This strain relief fitting is ideal in applications where the available space is limited. Note: Contact us about purchasing individual standard or reduced inserts
|
|
|
