 |
Sealcon CD13NA-BXA black nylon cord grip for hazardous locations is designed for extreme applications. Also known as Hummel 1.292.1201.70. Sold Individually.
Locking nut & O-Ring sold separately
Specifications
- Thread Size: 1/2" NPT
- Cable O.D. Range: .24" - 47" (6 - 12 mm)
- Through Hole Diameter: .83" (21.1 mm)
- Body Length: 1.06" (27 mm)
- Thread Length: .51" (13 mm)
- Wrench Flat Dome: .94" (24 mm)
- Wrench Flat Body: .94" (24 mm)
Features
- Fiber Glass Reinforced Polyamide V0 Material with NBR Seal
- Operating Temperature - - 20 C to 85 C (- 4 F to 185 F)
- International Approvals - ATEX/IECEx, CE, CSA, and German Lloyd
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
- Impact Resistance - 7 Joule
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- UL f1 (746C) UV/Ozone stable
- Vibration Resistant Dome
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
Approvals
- RoHS Compliance
- CSAus
- V0 UL94 Rated / Approved
- IECEx
- Certified European Approval
- ATEX
- II 2G Ex eb IIC Gb
- II 1D Ex ta IIIC Da
- Class I Div 2 Groups A, B, C, D
- Class II Div 1 Groups E, F, G
Sealcon 1/2" NPT nylon plastic hazardous location cable glands are particularly useful in applications that need exceptional performance and fire resistance, which is accomplished without twisting the cable. Also known as strain relief fittings or cord grips, they provide a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. It is made from fiber reinforced nylon plastic, for higher resistance to impact. It meets the DIN EN 60079-0: 2012 standard. Hazardous location fittings are ATEX approved, indicating they are designed for potentially explosive environments. This cable gland is designated Ex-e, indicating increased safety. Increase adaptability by switching the standard inserts with reduced inserts. Sealcon patented overlapping clamping splines and recessed custom grommets keep your cable protected from damage and the elements. The CD13NA-BXA cord grip creates a large amount of Pull-out resistance by applying concentric force on all points of the cable.
Note: Contact us about purchasing individual standard or reduced inserts
|
|
|
