|
Sealcon CF13GA-GY enlarged body gray nylon cord grip is liquid tight to 150 psi. PG 13 / 13.5 Thread, Accommodates .39" - .55" (10 - 14 mm) O.D cable. Sold Individually.
(Locking nut & O-Ring sold separately) Also known as Hummel #1.593.1300.14
Thread Size/Type
|
PG 13 / 13.5
|
- Nylon 6/6 Material with Buna-N Seal
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
|
Through Hole Dia.
|
.8" (20.3 mm)
|
Body Length
|
3.94" (100 mm)
|
Thread Length
|
.35" (9 mm)
|
Wrench Flat Dome/Body
|
1.06" (27 mm)
|
Sealcon PG 13 / 13.5 Nylon / Plastic cable glands, sometimes known as cord grips or strain relief fittings, are used in nearly every industry to help customers connect wire or cable to a wide variety of applications. This fitting provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. Enlarged body cord grips are intended for use when the cable diameter increases, but the thread size stays the same. To increase modularity, switch out the standard or reduced inserts. Sealcon patented overlapping clamping splines, recessed custom grommets protect your cable from damage and the elements. The CF13GA-GY cable gland creates a large amount of Pull-out resistance by applying even force on all points of the cable. Flex nut fittings prevent kinking and chafing of the cable. Note: Contact us about purchasing individual standard or reduced inserts
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
Sealcon CF13GA-GY Gray Nylon PG 13 Flex Cable Gland
|
|
|