Sealcon CD13NR-EX high quality EMI/RFI Proof nickel plated brass cord grip for hazardous locations is designed for extreme applications. Also known as Hummel 1.616.1200.71. Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: 1/2" NPT
- Cable O.D. Range: .20" - .35" (5 - 9 mm)
- Through Hole Diameter: .83" (21.1 mm)
- Body Length: .94" (24 mm)
- Thread Length: .51" (13 mm)
- Wrench Flat Dome: .87" (22 mm)
- Wrench Flat Body: .94" (24 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal, Polyamide Clamping Insert & Buna-N O-Ring
- Operating Temperature - - 20 C to 95 C (- 4 F to 203 F)
- International Approvals - ATEX, CE, CSA, and German Lloyd
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
Sealcon 1/2" NPT nickel plated brass hazardous location cord grips are particularly useful in applications that need exceptional performance and fire resistance, which is done without twisting the cable. This fitting provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. The CD13NR-EX lets you increase and decrease the cable opening by just switching out the standard or reduced inserts. The self locking ACME thread on the dome top ensures that the overlapping splines apply an even seal. This keeps the form seal from being pulled out of the fitting & provides pull-out protection for your cable so no damage is caused. Note: Contact us about purchasing individual standard or reduced inserts
EMI/RFI Proof cable glands meet the standards for electromagnetic interference protection and reliable grounding. This standard version presses braiding against the inside wall by means of the integrated O-Ring. This cable gland can only be used with a braided shield. Applications involving plant equipment, control panels, railroads, and measuring and feedback systems are all areas that benefit from these types of cord grips. Hazardous location fittings are ATEX approved, indicating they are designed for potentially explosive environments. This cable gland is designated Ex-e, for increased safety
Sealcon CD13NR-EX 1/2" NPT Strain Relief Fitting
