 |
Sealcon CD13NA-TE high quality PVDF cord grip is designed for the toughest applications. Also known as Hummel 1.299.1200.70. Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: 1/2" NPT
- Cable O.D. Range: .24" - 47" (6 - 12 mm)
- Through Hole Diameter: .83" (21.1 mm)
- Body Length: 1.06" (27 mm)
- Thread Length: .51" (13 mm)
- Wrench Flat Dome: .94" (24 mm)
- Wrench Flat Body: .94" (24 mm)
Features
- PVDF Material with FPM Seal
- Operating Temperature - -35 C to 150 C (-31 F to 302 F)
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Vibration Resistant Dome
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
Sealcon 1/2" NPT PVDF Cord Grips, Strain Relief Fittings or Cable Glands are used to help customers connect their cable or wire to their applications. This fitting provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. PVDF cord grips feature a PVDF body with a Viton insert. They are also resistant to chemicals and can stand up to hot or cold temperatures. Switching out the standard or reduced inserts increases modularity. Sealcon patented overlapping clamping splines, recessed custom grommets help protect your cable from damage and the elements. The CD13NA-TE fitting provides a substantial amount of Pull-out resistance by applying concentric force on all points of the cable.
Note: Contact us about purchasing individual standard or reduced inserts
*Viton is a trademark of DuPont Elastomer
Sealcon CD13NA-TE Teflon 1/2" NPT Cable Gland
|
|
|
