Sealcon CD50MA-BR high quality nickel plated brass liquid tight strain relief cord grips are designed for the toughest applications. Also known as Hummel 1.609.5000.50. Sold Individually.
(Locking nut sold separately)
Specifications
- Thread Size: M50 x 1.5
- Cable O.D. Range: 1.26" - 1.50" (32 - 38 mm)
- Through Hole Diameter: 1.97" (50 mm)
- Body Length: 1.46" (37 mm)
- Thread Length: .35" (9 mm)
- Wrench Flat Dome: 2.24" (57 mm)
- Wrench Flat Body: 2.24" (57 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal & Nylon 6/6 Splined Bushing
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- VDE
Competitor Cross Reference
- Lütze 600703 (Cable O.D. 26-35mm)
- Remke BRM50AA (Cable O.D. 1.18"-1.5")
Sealcon CD50MA-BR Nickel Plated Brass Cord Grips, Strain Relief Fittings or Cable Glands are used to help customers in all industries connect their cable or wire to their applications. This fitting provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. This Nickel Plated Brass Strain Relief with M50 x 1.5 Metric thread will provide your application with a product made of exceptional quality. Modularity: The Strain Relief allows you to increase and decrease the cable opening by just swapping out the standard and reduced inserts. The self locking ACME thread on the dome and flex top ensures that the overlapping splines apply a concentric seal, thereby preventing the form seal from being pulled out of the fitting & ensuring pull-out protection of your cable without damaging it. Note: Contact us about purchasing individual standard or reduced inserts
Hummel 1.609.5000.50 Strain Relief Fitting
