The Lumberg Automation 934691003 0980 ESL 813 Lion-R is an active 8 port 5 pin M12 distribution block, with 8 digital inputs & 8 digital outputs. Has rotary switches for setting IP addresses, with two 7/8" power supply ports. It is made to run even under harsh conditions and provides secure communication of data. It can be used to connect sensors and actuators to Ethernet/IP networks. Rated IP 67.
Features
- Galvanic isolation between sensors, actuators and Ethernet/IP
- Less time required to find a fault
- "Fail safe" function promotes reliability & switches the module off if a fault is found
- Integrated 10/100 Mbs dual port switch for line and ring topologies
- Color coded connectors
- Rotary switches or webserver set up IP addresses
- 7/8" power supply & M12 ports support T distributors
- Vibration resistant
- Overall mechanical stability and functional reliability
TECHNICAL DATA
- Protection Class- IP 67
- Operating Temperature Range- -10 C to 60 C (14 F to 140 F)
- Housing Material- Diecast Zinc
- Dimensions- 261.4mm Length x 59.6mm Width x 17.6mm Height (10.3" x 2.35" x 0.7")
BUS SYSTEM
- Transmission Rate- 10/100 Mbs
- Address Range- 0-255 (default address 0)
INPUTS
- Rated Input Voltage- 24 VDC
- Sensor Type- PNP (source)
- Power Consumption of Sensor- Max. 200 mA
- Reverse Polarity Protection- Yes
- Short Circuit Proof- Yes
- Number of Digital Channels- 8
- Status Indicator- LED white per channel
- Diagnostic Indicator- LED red per port
ACTUATOR POWER SUPPLY UL
- Rated Output Current- 24 VDC
- Voltage Range- 19 - 30 VDC
- Reverse Polarity Protection- Yes/Antiparallel diode
- Indicator- LED white
OUTPUTS
- Rated Output Current- 1.6 A per channel
- Short Circuit Proof- Yes
- Max. Current Carrying Capacity- 9 A per module
- Overload Proof- Yes
- Number of Digital Channels- 8
- Channel Type N.O.- P-switching
- Status Indicator- LED white per channel
- Diagnostic Indicator- LED red per port
- Galvanic Isolation from Electronics- Yes
- Approvals- UL, CSA
|
Diagnostic Information
|
|
LED
|
Indication
|
Condition
|
|
1...8 A
|
White
|
Channel status
|
|
1...8 DIA A
|
Red
|
Periphery error
|
|
1...8 B
|
White
|
Channel status
|
|
1...8 DIA B
|
Red
|
Periphery error
|
|
P1 Lnk/Act
|
Green
Yellow flashing
Off
|
Connection to an Ethernet device
I/O device exchanging data
No connection to any devices
|
|
P2 Lnk/Act
|
Green
Green flashing
Off
|
Connection to an Ethernet device
I/O device exchanging data
No connection to any devices
|
|
MS (module status)
|
Green
Green flashing
Red/Green flashing
Red flashing
Off
|
Device ready
Wrong configuration
Self test running
Firmware update
Device is off
|
|
NS (network status)
|
Green flashing
Green
Red flashing
Red
Red/Green flashing
Off
|
IP address is available
Connection to master is available
At least one connection timed out
IP address being used by another device
Self test running
Device is off/has no IP address
|
|
Us
|
Green
Red
|
Voltage 18 V<= US<=30 V
Voltage US<18 V or US>30 V
|
|
UL
|
Green
Red
|
Voltage 18 V<= US<=30 V
Voltage US<18 V or US>30 V
|
This M12 distribution block is designed to be used as an interface between the field and control level, by sending field-level signals to the controller. By providing a place for multiple M12 connections, it saves additional time and cost, while making it easy to expand. It works for both line and ring topologies. If a connection is lost, the Device Level Ring protocol allows the distribution block to switch to another ring segment, for further reliability. It's ideal for plant and mechanical engineering, as it withstands exposure from coolants, lubricants, filings, and welding sparks.
