The Red Lion Sixnet
® Series SLX-8ES-1 is an unmanaged eight port Industrial Ethernet Switch. Housed in an aluminum DIN rail enclosure, this SlimLine SLX series switch features eight 10/100BaseTX RJ45 ports. It is made to operate at the best speed to provide real-time performance, as well as to withstand the demanding conditions of industrial environments. No user set-up is necessary during installation, as the switch has complete plug and play capability, saving you time. The compact SlimLine housing ensures that it won't take up much space, leaving more room on the DIN-Rail.
PRODUCT FEATURES
- Compact Housing
- Unmanaged Plug & Play Capability
- Full IEEE 802.3 Compliance
- 8 RJ45 Ports
- Extended Environmental Specifications
- -40 C to 85 C Operating Temperature
- >1M+ Hours MTBF
- Supports Full/Half Duplex Operation
- LED Link/Activity Status Indication
- Auto Senses Speed and Flow
- MDIX Auto Sensing Cable
- Redundant Power Inputs (10-30 VDC)
- Power Inputs with Surge Protection
- Rugged metal DIN-Rail enclosure
- Fast wire-speed switching
- Intelligent routing to eliminate collisions
- Auto Polarity Corrects Crossed Signals
- UL/CSA (CUL), CE & Hazardous Locations (Zone 2) & Maritime rated
Red Lion Sixnet SLX-8ES Series User Manual
SLX Series Unmanaged Ethernet Switch SLX-8ES-1
Ethernet Performance Unmanaged, Store & Forward Wire Speed Switching Automatic Learning, Aging, Migration for Addresses Typical Latency for 10Mbps Ports: 16 us + frame time- varies on load Typical Latency for 100Mbps Ports: 5 us + frame time- varies on load Full Duplex Operation w/ Flow Control MAC Addresses supported: 1024 Memory Bandwidth: 3.2 Gbps Ethernet Isolation: 1500 VRMS 1 min Ethernet Ports Shielded RJ45 Ports: 10/100BaseTX RJ45 Port Speed Auto-negotiation RJ45 MDI/MDIX Auto-crossover Auto-Polarity corrects crossed +/- signals Ethernet Compliance IEEE 802.3 (10Mbps Ethernet supports legacy devices) IEEE 802.3u (Fast Ethernet 100Mbps for new devices) IEEE 802.3x (Full-Duplex with flow control) Power Input Typical Input Power: 4 W (all ports active) Transient Protection: 15,000 watts peak Spike Protection: 5000 watts (10 times for 10 uS) Environmental Operating Temperature: -40 C to 85 C (cold startup -40 C) Storage Temperature: -40 C to 85 C Humidity (Non-Condensing): 5 to 95% RH Vibration & Shock: IEC60068-2-6 Standards Compliance Electrical Safety: UL 508/CSA C22.2/14, EN61010-1, CE EMC: FCC Part 15, ICES-003, EN55022, EN61000-6, CE Hazardous Locations: UL 1604/CSA C22.2/213 (Class I, Div 2), EN60079-15 (Zone 2, Category 3), CE (ATEX) Maritime: Marine & Offshore per ABS Physical DIN-Rail or Panel Mount Dimensions: 4.5" H x 1.5" W x 3.79" L Case: corrosion resistant aluminum, rated IP 40
|