The Red Lion Sixnet
® Series SL-5ES-3ST is an unmanaged 5 port Industrial Ethernet Switch. Housed in a Lexan DIN rail enclosure, this SlimLine SL series switch features 20km singlemode fiber optic cable with an ST style fiber connector. It is designed to run at a speed for optimal real-time performance. It's also built to take the demands of industrial applications. A user set-up not required, as the switch has complete plug and play capability, reducing installation time. The SlimLine housing is has a space saving design, thereby leaving more available room on the DIN-Rail.
PRODUCT FEATURES
- Compact Housing
- Unmanaged Plug & Play Capability
- Full IEEE 802.3 Compliance
- 5 Ports: Four RJ45 Ports, One Fiber Port
- Extended Environmental Specifications
- -40 C to 60 C Operating Temperature
- >1M+ Hours MTBF
- Supports Full/Half Duplex Operation
- LED Link/Activity Status Indication
- Auto Senses Speed and Flow
- MDIX Auto Sensing Cable
- Redundant Power Inputs (10-30 VDC)
- Power Inputs with Surge Protection
- Lexan DIN-Rail Enclosure
- Fast wire-speed switching
- Intelligent routing to prevent collisions
- Auto Polarity Corrects Crossed Signals
- UL/CSA (CUL), CE & Hazardous Locations (Zone 2) & Maritime rated
Red Lion Sixnet SL-5ES Series User Manual
5 Port Ethernet Switch SL-5ES-3ST
Ethernet Performance Unmanaged, Store & Forward Wire Speed Switching Automatic Learning, Aging, Migration for Addresses Typical Latency for 10Mbps Ports: 16 us + frame time- varies on load Typical Latency for 100Mbps Ports: 5 us + frame time- varies on load Full Duplex Operation w/ Flow Control MAC Addresses supported: 1024 Memory Bandwidth: 3.2 Gbps Ethernet Isolation: 1500 VRMS 1 min Ethernet Ports Shielded RJ45 Ports: 10/100BaseTX RJ45 Port Speed Auto-negotiation RJ45 MDI/MDIX Auto-crossover Auto-Polarity corrects crossed +/- signals Fiber Optic Port Speed: 100BaseFX (100Mbps) Full Duplex Operation Typical Fiber Wavelength: 1300 nm center Fiber max. Distance: 20 km for singlemode 9 or 10/125 um ST Ethernet Compliance IEEE 802.3 (10Mbps Ethernet supports legacy devices) IEEE 802.3u (Fast Ethernet 100Mbps for new devices) IEEE 802.3x (Full-Duplex with flow control) Power Input Typical Input Power: 3 W (all ports active) Transient Protection: 15,000 watts peak Spike Protection: 5000 watts (10 times for 10 uS) Environmental Operating Temperature: -40 C to 60 C Storage Temperature: -40 C to 85 C Humidity (Non-Condensing): 5 to 95% RH Vibration & Shock: IEC60068-2-6 Standards Compliance Electrical Safety: UL 508/CSA C22.2/14, EN61010-1, CE EMC: FCC Part 15, ICES-003, EN55022, EN61000-6, CE Hazardous Locations: UL 1604/CSA C22.2/213 (Class I, Div 2), EN60079-15 (Zone 2, Category 3), CE (ATEX) Maritime: Marine & Offshore per ABS Physical DIN-Rail or Panel Mount Dimensions: 4" H x 1" W x 3.26" L Case: UL94V0 Lexan rated IP 40
|