 |
 |
 |
|
This Seifert KH 800-800 unit is an 800W, 230V control cabinet electric heater. The thermostat is built-in, and its housing is made from aluminum. A switch controls the two fan settings, which determine when the fan comes on. Power status of the heater is shown by a pilot light, which illuminates when the heater is on. Both Celsius and Fahrenheit temperature ranges are labeled for the adjustment knob on the unit.
It features a lightweight design that does not need much maintenance and is intended to be panel mounted.
- Thermostat built-in
- Dual fan settings
- Panel mounted
- Lightweight
- Easy maintenance
- Indicator light shows when heater is on
- Disperses warm air throughout cabinet
- Temperatures adjustments in Celsius & Fahrenheit
Specifications
- Housing Material- Aluminum
- Heating Power at 10 C- 800 W
- Operating Temperature Range- -4 F to +104 F (-20 C to 40 C)
- Dimensions- 7.48 x 4.09 x 4.61 in.
- Rated Voltage- 230 VAC @ 50 / 60 Hz
- Rated Current- 3.6 A
- Approx. Fan Airflow- 25.9 cfm
- Fuse Rating- 5 A (T)
- Approvals- CE, C UR US
Seifert KH 800-800 Cabinet Heater Downloads
Seifert 801800A44000 KH 800-800 Electrical Cabinet Heater
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
If the internal temperature inside the enclosure does not stay consistent, humidity and condensation can gather inside. This excess moisture can cause damage to the internal components or even create a disruption in performance. The risk of this sort of damage is reduced through the Seifert 800W heater, which disperses warmer air evenly on the inside. This unit is designed to be mounted inside the control cabinet, near the bottom, away from dust or water exposure. Cabinets used for outside applications benefit the most from an internal heater.
The fan is either set to run continuously, or triggered on along with the heater. The heater operates by drawing in the cooler air through the bottom of the unit, while releasing warmer air through the top. If the thermostat senses the internal temperature going below the adjusted point, it powers on the heater. The temperature is adjustable from -4 F to 104 F(-20 C to 40 C). In the event there is not enough airflow, or if the fan does not function correctly, the unit itself could overheat. To prevent this, the heater has an auto-reset over-temperature thermostat that will shut it off.
|
|
|
|
|
|
|
