The Sealcon M23 panel mounted single hole signal connector features a 9 pole insert and male threads. The body is copper-zinc alloy with a nickel plated brass surface and gold plated brass alloy contacts. Housings available in three versions: single hole mount, front mount for male inserts only and front mount for female inserts only. Single hole mount housings can use male or female inserts. Insert takes eight 1mm contacts & one 2mm contact. Housings, male/female inserts & optional crimp contacts are determined based on the customer's requirements. Operating temperature: - 40 C to 125 C (- 40 F to 257 F). Rated IP 67 / IP 69K, NEMA 4x. Note: Image is for reference, actual part may differ.

Features

• Tools are not needed to install or remove crimp contacts - Reduces risk of damage to the insert or contacts caused by repeated installation or removal. The Euro Lock System inside the insert keeps the contacts in position
• Crimp contacts machined
• Solder contacts for dip soldering for PC boards
• SLS (Spring Loaded Sockets) for high vibration areas - Socket contacts feature an integrated spring to increase the reliability of the connection and add support, up to 50g of shock and 10g continuous force.
• Color coded spacers for male and female inserts
• UL & CSA approvals
• RoHS & Deca BDE compliant

Inserts
Contact Diameter- 1mm (8), 2mm (1)
Nominal current- 8 A (1mm), 20 A (2mm)
Nominal voltage (Degree of protection 2)- 500 V
Nominal voltage (Degree of protection 3)- 200 V
Test voltage (Breakdown voltage)- 2500 V
Insulation resistance- >10 MOhm
Max. contact resistance- 3 mOhm
Crimp Contacts Crimp Range
7.010.901.031: 0.08 mm² - 0.56 mm², AWG 28 - AWG 20
7.010.901.001: 0.14 mm² - 1.0 mm², AWG 26 - AWG 17
7.010.901.012: 0.08 mm² - 0.56 mm², AWG 28 - AWG 20
7.010.901.002: 0.34 mm² - 1 mm², AWG 22 - AWG 17
7.010.901.021: 1 mm² - 1.5 mm², AWG 17 - AWG 16
7.010.901.022: 0.75 mm² - 1.5 mm², AWG 18 - AWG 16
7.010.902.001: 0.75 mm² - 2.5 mm², AWG 18 - AWG 14
7.010.902.002: 0.75 mm² - 2.5 mm², AWG 18 - AWG 14

HOW TO ORDER

1. Select a housing - Panel connector housings offer 3 different thread types. Optional: Jam Nut for front mount housings; Jam Nut M25 x 1.5 for single hole mount housing.
2. Select an insert - 9 pole male (pin) and female (socket) inserts are available with dip solder contacts or no contacts (for crimping).
3. Select optional crimp contacts - Choose from either 1mm pin or socket crimp contacts (sold in sets of 8). Then select either a 2mm pin or socket crimp contact. Please Note: Separate contacts are not needed for inserts with soldered contacts (choose the No Contacts Required option)

Panel Mount M23 Single Hole 9 Pole Connector with Male Threads