Sealcon SR-10-02 high quality polyethylene seal rings are liquid tight to 150 psi. 1" NPT Thread. Sold Individually.
Specifications
- Thread Size/Type: 1" NPT
- Inner Diameter: 1.32" (33.5 mm)
- Outer Diameter: 1.71" (43 mm)
- Height: .09" (2.2 mm)
Features
- Polyethylene Material
- Operating Temperature - -22 F to 158 F (-30 C to 70 C)
- Submersible to 300 Ft - NEMA 4x & 6 (IP68 / IP 69 K)
- 150 PSIG (10 Bar) Rating
- RoHS & Deca BDE approval
The Straight Strain Relief fittings feature a molded O-Ring groove. The Snap Elbows and some of the Conduit Fittings do not have recess for an O-Ring. In that case, the Seal Ring would be the best choice, unless the hole can be beveled to accommodate an O-Ring. If NEMA 4x or 6 (European IP 68 - submersible) is required, Seal Rings should be used when mounting these fittings to a control panel, secured with a locking nut.
