The Sealcon M23 panel mounted rear mount signal connector features a 19 pole insert and male threads. The body is copper-zinc alloy with a nickel plated surface and gold plated brass alloy contacts. Insert takes sixteen 1mm contacts and three 1.5mm contacts. Housings, male/female inserts & optional crimp contacts are selected based on customer preference. Male or female inserts can be fitted in the same type of housing, increasing flexibility. Operating temperature: - 40 C to 125 C (- 40 F to 257 F). Rated IP 67 / IP 69K, NEMA 4x. Note: Image is for reference, actual part may differ.

Features

• No tools are needed to install or remove crimp contacts - Less risk of damage to the insert or contacts due to repeated installation or removal. The Euro Lock System inside the insert keeps the contacts in position
• Crimp contacts machined
• Solder contacts for dip soldering for PC boards
• SLS (Spring Loaded Sockets) for high vibration environments - Socket contacts have an integrated spring to increase the reliability of the connection and add support, up to 50g of shock and 10g continuous force.
• Color coded spacers for male and female inserts
• UL & CSA approvals
• RoHS & Deca BDE compliant

Inserts
Contact Diameter- 1mm (16), 1.5mm (3)
Nominal current- 8 A (1mm), 10 A (1.5mm)
Nominal voltage (Degree of protection 2)- 320 V
Nominal voltage (Degree of protection 3)- 100 V
Test voltage (Breakdown voltage)- 1500 V
Insulation resistance- >10 MOhm
Max. contact resistance- 3 mOhm
Crimp Contacts Crimp Range
7.010.901.031: 0.08 mm² - 0.56 mm², AWG 28 - AWG 20
7.010.901.001: 0.14 mm² - 1.0 mm², AWG 26 - AWG 17
7.010.901.012: 0.08 mm² - 0.56 mm², AWG 28 - AWG 20
7.010.901.002: 0.34 mm² - 1 mm², AWG 22 - AWG 17
7.010.901.021: 1 mm² - 1.5 mm², AWG 17 - AWG 16
7.010.901.022: 0.75 mm² - 1.5 mm², AWG 18 - AWG 16
7.010.901.501: 0.14 mm² - 1 mm², AWG 26 - AWG 17
7.010.901.512: 0.14 mm² - 0.56 mm², AWG 26 - AWG 20
7.010.901.502: 0.34 mm² - 1 mm², AWG 22 - AWG 17

HOW TO ORDER

1. Select a housing - Panel connector housings offer 4 different flange types. Certain housings are available with anti-vibration O-Rings
2. Select an insert - 19 pole male (pin) and female (socket) inserts are available with dip solder contacts or no contacts (for crimping). Inserts with ground (PE) have the ground located at position 12
3. Select optional crimp contacts - Choose from either 1mm pin or socket crimp contacts (sold in sets of 16). Then select either 1.5mm pins or sockets (sold in sets of 3). Please Note: Separate contacts are not needed for inserts with soldered contacts (choose the No Contacts Required options)

Rear Mount M23 19 Pole Sealcon Connector with Male Threads