 |
Sealcon CD48AP-BR high quality nickel plated brass cord grip is designed for the toughest applications. Also known as Hummel 1.697.4899.01 (insert Hummel 1.089.4899.19). Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: PG 48
- Through Hole Diameter: 2.34" (59.4 mm)
- Body Length: 1.50" (38 mm)
- Thread Length: .39" (10 mm)
- Wrench Flat Dome: 2.52" (64 mm)
- Wrench Flat Body: 2.52" (64 mm)
- Number of Holes: N/A
- Hole Diameter: N/A
Features
- Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL Registered
- CE
- German Lloyd
- PCT Approval
Sealcon PG 48 Nickel Plated Brass Multi-hole strain relief fittings, also known as cord grips or cable glands, are used in a large number of industries when attaching cable or wire to different applications. This cable gland can obtain a NEMA 4x (IP 65) rating. For that to be possible, the cable cannot be less than 80% of the diameter of the hole. There also cannot be more than .04" (1 mm) of difference between the diameter of the cable and that of the hole. Testing may be needed to confirm if the NEMA 6 (IP 68) submersible rating is achievable. The ACME thread on the CD48APBR dome top is self locking and the overlapping splines apply an even seal. This keeps the form seal from being pulled out of the fitting & provides your cable with pull-out protection so it causes no damage.
|
|
|
