 |
Sealcon CD36A1-BR high quality nickel plated brass cord grips are designed for the toughest applications. Hummel 1.697.3600.01 (insert Hummel 1.089.3600.19). Sold Individually.
(Locking nut sold separately)
Specifications
- Thread Size: PG 36
- Through Hole Diameter: 1.85" (47 mm)
- Body Length: 1.38" (35 mm)
- Thread Length: .31" (8 mm)
- Wrench Flat Dome: 1.97" (50 mm)
- Wrench Flat Body: 1.97" (50 mm)
- Number of Holes: 5
- Hole Diameter: .35" (9 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL Registered
- CE
- German Lloyd
- PCT Approval
Sealcon PG 36 Nickel Plated Brass Multi-hole cord grips, also referred to as strain relief fittings or cable glands, are used to connect cable to different applications in many industries. This strain relief fitting can provide a NEMA 4x (IP 65) rating, provided that the cable is not less than 80% of the diameter of the hole. There also cannot be more than .04" (1 mm) of difference between the cable's diameter and the hole's diameter. The NEMA 6 (IP 68) submersible rating is possible, however testing may be needed to confirm it. The ACME thread on the CD36A1BR dome top is self locking, with the overlapping splines applying an even seal. This keeps the form seal from being pulled out of the fitting & gives your cable pull-out protection so no damage is caused.
|
|
|
