 |
Sealcon CD29A2-BR high quality nickel plated brass cord grips are designed for the toughest applications. Hummel 1.697.2901.01 (insert Hummel 1.089.2901.19). Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: PG 29
- Through Hole Diameter: 1.47" (37.3 mm)
- Body Length: 1.14" (29 mm)
- Thread Length: .31" (8 mm)
- Wrench Flat Dome: 1.57" (40 mm)
- Wrench Flat Body: 1.57" (40 mm)
- Number of Holes: 4
- Hole Diameter: .35" (9 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL Registered
- CE
- German Lloyd
- PCT Approval
Sealcon PG 29 Nickel Plated Brass Multi-hole cord grips are used by many industries when connecting wire or cable to different applications. This strain relief fitting can provide a NEMA 4x (IP 65) rating. However in order to achieve this rating, the cable cannot be less than 80% of the diameter of the hole. Also, there cannot be more than .04" (1 mm) of difference between the cable's diameter and that of the hole. Testing may be required to ensure that the NEMA 6 (IP 68) submersible rating is possible. The ACME thread on the CD29A2BR dome top is self locking, with the overlapping splines applying an even seal. This keeps the form seal from being pulled out of the fitting & gives your cable pull-out protection so no damage is caused.
|
|
|
