 |
 |
 |
|
Sealcon CD16NP-BR high quality nickel plated brass cord grip is designed for the toughest applications (insert Hummel 1.089.1699.19). Sold Individually.
Locking nut sold separately.
Specifications
- Thread Size: 1/2" NPT
- Through Hole Diameter: .83" (21.1 mm)
- Body Length: 1.46" (37 mm)
- Thread Length: .51" (13 mm)
- Wrench Flat Dome: .94" (24 mm)
- Wrench Flat Body: .94" (24 mm)
- Number of Holes: N/A
- Hole Diameter: N/A
Features
- Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- -40 C to 100 C (-40 F to 212 F)
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL Registered
- CE
- German Lloyd
- PCT Approval
Sealcon 1/2" NPT Nickel Plated Brass Multi-hole Strain Relief Fittings, Cord Grips and Cable Glands, are found in many industries and are used to attach cable or wire to different applications. This fitting can provide a NEMA 4x (IP 65) rating. The cable cannot be less than 80% of the diameter of the hole to obtain this rating. Also, there cannot be more than .04" (1 mm) of difference between the cable's diameter and the diameter of the hole. It is recommended that the fitting be tested beforehand to see if the NEMA 6 (IP 68) submersible rating has been achieved. The ACME thread on the CD16NPBR dome top is self locking, so the overlapping splines apply an even seal. This keeps the form seal from being pulled out of the fitting & provides your cable with pull-out protection so no damage is caused.
|
|
|
 |
|
 |
|
