 |
Sealcon CD13N2-BR high quality nickel plated brass cord grips are designed for the toughest applications. Also known as Hummel 1.697.1201.70. Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: 1/2" NPT
- Through Hole Diameter: .83" (21.1 mm)
- Body Length: .94" (24 mm)
- Thread Length: .51" (13 mm)
- Wrench Flat Dome: .87" (22 mm)
- Wrench Flat Body: .94" (24 mm)
- Number of Holes: 6
- Hole Diameter: .12" (3 mm)
Features
- Nickel Plated Brass, Form Seal: Buna-N, Splined Bushing: Nylon 6/6, O-Ring: Buna-N
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- Canadian Standard Association
- Registered Underwriters Laboratories
- Certified European Approval
- German Lloyd
- PCT Approval
Sealcon 1/2" NPT Nickel Plated Brass Multi-hole Cable Glands, Cord Grips and Strain Relief Fittings are used when attaching wire or cable to different applications and can be found in almost any industry. This cable gland provides a NEMA 4x (IP 65) rating. In order to attain this rating, the cable cannot be less than 80% of the diameter of the hole. The difference in diameter also cannot be more than .04" (1 mm). between the cable and the hole. The NEMA 6 (IP 68) submersible rating is achievable, however it may need to be tested beforehand to ensure this. The ACME thread on the CD13N2BR dome top is self locking, so the overlapping splines create an even seal and the form seal does not come out of the fitting. This also gives your cable pull-out protection so it causes no damage.
|
|
|
