Saginaw Control & Engineering SCE-6PBSS is a 6 position push button enclosure. It is made from 0.063" 304 stainless steel with a #4 brushed finish and 30.5mm pushbutton entrances in a 2x3 configuration. Used for wash down applications and corrosive environments.

• 9.5" H x 6.25" W x 3" D (241.3mm x 158.75mm x 76.2mm)
• Seams are continuously welded
• Cover screws thread into sealed wells
• Accepts any brand of oil-tight push buttons, switches, or pilot lights
• 4 way standard push button entrances
• Cover can be immediately removed
• Gasket is oil & water resistant
• Welded mounting provision located on the back at the top and bottom
• IS5 industry standards - NEMA Type 4, 4x, 12 and Type 13, UL Listed Type 4, 4x, and 12, CSA Type 4, 4x, and 12, IEC 60529, IP 66

Saginaw SCE-6PBSS 6 Position 30.5mm 304 Stainless Steel Push Button Box