Saginaw Control & Engineering SCE-4SPBI is a 4 position push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and 22.5mm pushbutton entrances in a 2x2 configuration. Ideal for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

• 7.25" H x 6.25" W x 3" D (184.15mm x 158.75mm x 76.2mm)
• Continuously welded seams
• Cover screws thread into sealed wells
• Works with any brand of oil-tight push buttons, switches, or pilot lights
• 4 way standard push button entrances
• Gasket is oil & water resistant
• Welded mounting provision located on the back at the top and bottom
• IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Saginaw SCE-4SPBI 4 Position 22.5mm Steel Push Button Enclosure