Saginaw Control & Engineering SCE-3PBXI is a 3 position extra deep push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and 22.5mm pushbutton entrances in a 1x3 layout. Useful for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

• 8" H x 4" W x 4.75" D (203.2mm x 101.6mm x 120.65mm)
• Seams are continuously welded
• Cover screws thread into sealed wells
• Works with any brand of oil-tight push buttons, switches, or pilot lights
• 4 way standard push button entrance
• Gasket is oil & water resistant
• Welded mounting plates located on the back at the top and bottom
• Powder coating on both the inside and outside
• IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Saginaw 3 Position Extra Deep Steel Push Button Box SCE-3PBXI