Saginaw Control & Engineering SCE-2PB is a 2 position push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and 30.5mm pushbutton entrances in a 1x2 configuration. Used for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

• 5.75" H x 3.25" W x 2.75" D (146.05mm x 82.55mm x 69.85mm)
• Seams are continuously welded
• Cover screws thread into sealed wells
• Accepts any brand of oil-tight push buttons, switches, or pilot lights
• Gasket is oil & water resistant
• Welded mounting provision located on the back at the top and bottom
• IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Saginaw SCE-2PB 2 Position 30.5mm Steel Push Button Enclosure