Saginaw Control & Engineering SCE-16PBAI is a 16 position sloped front push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and 22.5mm pushbutton entrances in a 4x4 configuration. Ideal for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture where a slanted surface is needed.

• 11.75" H x 10.75" W x 9" D (298.45mm x 273.05mm x 228.6mm)
• Continuously welded seams
• Cover screws thread into sealed wells
• Compatible with any brand of oil-tight push buttons, switches, or pilot lights
• 4 way standard push button entrance
• Gasket is oil & water resistant
• Comes with mounting feet
• Provisions for sub-panel (sold separately)
• IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

16 Position 22.5mm Sloped Push Button Box Saginaw SCE-16PBAI