Saginaw Control & Engineering SCE-1PB is a 1 position push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and a 30.5mm pushbutton entrance. Used for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

• 3.5" H x 3.25" W x 2.75" D (89mm x 82.55mm x 69.85mm)
• Seams are continuously welded
• Cover screws thread into sealed wells
• Accepts any brand of oil-tight push buttons, switches, or pilot lights
• Pour in place gasket is oil & water resistant
• Welded mounting provision on the back at the top and bottom
• IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Saginaw SCE-1PB 1 Position 30.5mm Steel Push Button Enclosure