Saginaw Control & Engineering SCE-1PBX is a 1 position extra deep push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and a 30.5mm pushbutton entrance. Ideal for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

• 4" H x 4" W x 4.75" D (101.6mm x 101.6mm x 120.65mm)
• Continuously welded seams
• Cover screws thread into sealed wells
• Compatible with any brand of oil-tight push buttons, switches, or pilot lights
• 4 way standard push button entrance
• Gasket is oil & water resistant
• Welded mounting provision located on the back at the top and bottom
• IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

1 Position 30.5mm Steel Push Button Box Saginaw SCE-1PBX