|
|
|
|
The Red Lion PAXLIT00 PAX LIT Lite series 5 Amp current panel meter has a 3 1/2 digit, red LED display in a 1/8 DIN housing
. This panel meter is designed to measure large AC currents. It measures up to 5 Amps on its own, or up to 1999 Amps with an external current transformer. Scaling is possible, and the decimal point location can be selected via DIP switch. The display can show a minus sign if the current is in the negative. AC powered. Accessory shunts are available for higher current ranges.
Features
- 1/8 DIN Housing
- 3 1/2 Digit, Red LED Display
- Built In Scaling Provisions
- Selectable Decimal Point Location
- Auto Zeroing Circuits
- Over-Range Indication
- NEMA 4X/IP65 - Front Panel
Red Lion PAX LIT Lite Series User Manual
Specifications
Display 3 1/2 digit, 0.56" (14.2 mm) red LEDs Power Requirements 115 or 230 VAC, switch selectable. Allowable power line variation +/-10%, 50/60 Hz, 6 VA. Isolation: 2300 Vrms for 1 min. between input and supply Working Voltage: 300 V max., CAT II Signal Input Range: 0 to 5 Amps AC @ 45 to 400 Hz Resolution: 2.5 mA Working Voltage: 300 V max., CAT II Accuracy: +/-(0.5% of reading + 5 digits) Max Shunt Current: 50 Amps for 1 sec.; 8 Amps continuous Response Time to Step Change Input: 1 sec. nominal Reading Rate: 2.5 readings/sec., nominal Standards Compliance UL Recognized Component, File # E179259, UL61010A-1, CSA C22.2 No. 61010-1 UL Listed, File # E137808, UL508, CSA C22.2 No. 14-M95 Type 4X Enclosure rating (Face only), UL50 IECEE CB Scheme Test Report # 04ME11209-20041018 IEC 61010-1, EN 61010-1: Safety requirements for electrical equipment for measurement, control, and laboratory use, Part 1. IP65 Enclosure rating (Face only), IEC 529 Electromagnetic Compatibility: See user manual Physical Operating Temperature: 0 C to 60 C (32 F to 140 F) Storage Temperature: -40 C to 80 C (-40 F to 176 F) Humidity: 85% max. relative humidity (non-condensing) Vibration to IEC 68-2-6: Operational 5 to 150 Hz, in X, Y, Z direction for 1.5 hours, 2 g's. Shock to IEC 68-2-27: Operational 30 g, 11 msec in 3 directions Altitude: Up to 2000 meters Construction: NEMA 4X/IP65 outdoor use, Installation Category II, Pollution Degree 2, One piece bezel/case; flame resistant; panel gasket & mounting clip Connection: High Compression Cage-Clamp Terminal Block Wire Strip Length: 0.3" (7.5 mm) Wire Gage: 30-14 AWG copper wire Torque: 4.5 inch-lbs (0.51 N-m) max. Dimensions: 1.95" x 3.8" x 4.2"
|
|
|
|
|
|
|