 |
 |
 |
|
The Red Lion PAXLA0U0 PAX Lite series universal DC input panel meter has a 5 digit, red LED display in a 1/8 DIN housing. This DC volt, current, and process meter features scaling and dual Form C relay outputs. Settings are adjusted through jumpers and the front panel function keys, which includes a display reset button. After setup, the function keys can be disabled. AC/DC powered
Features
- 5 Digit, Red LED Display
- Programmable Scaling & Decimal Points
- Programmable User Input
- Dual 5 Amp Form C Relay
- Universal Power
- Minimum & Maximum Display Capture
- 16 Bit Resolution A/D Converter
- NEMA 4X/IP65 - Front Panel
- UL Listed
Red Lion PAX Lite Series User Manual
Specifications
Display
5 digit, 0.56" (14.2 mm) intensity adjustable red LEDs, (-19999 to 99999)
Power Requirements
AC POWER: 50 to 250 VAC 50/60 Hz, 12 VA
Isolation: 2300 Vrms for 1 min. to all inputs and outputs
DC POWER: 21.6 to 250 VDC, 6 W
DC Out: +24 VDC @ 100 mA if input voltage is greater than 50 VAC/VDC
+24 VDC @ 50 mA if input voltage is less than 50 VDC
Memory
Nonvolatile E2PROM retains programmable parameters & display values
User Input
User Input: Software selectable pull-up (24.7 KOhm) or pull-down resistor
(20 KOhm) that determines active high or active low input logic.
Trigger levels: VIL = 1.0 V max; VIH = 2.4 V min; VMAX = 28 VDC
Response Time: 5 msec typ.; 100 msec debounce (activation and release)
Update Rate
A/D conversion rate: 20 readings/sec.
Display update: 500 msec min.
Output
Type: Dual FORM-C relay
Isolation To Sensor & User Input Commons: 1400 Vrms for 1 min.
Working Voltage: 150 Vrms
Contact Rating: 5 amps @ 120/240 VAC or 28 VDC (resistive load), 1/8
H.P. @ 120 VAC (inductive load)
Life Expectancy: 100,000 minimum operations
Response Time:Turn On Time: 4 msec max.
Turn Off Time: 4 msec max.
Standards Compliance
CE Approved
EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
EN 61010-1: General Requirements
RoHS Compliant
UL Listed: File #E137808
Type 4X Enclosure rating (Face only)
IP65 Enclosure rating (Face only)
IP20 Enclosure rating (Rear of unit)
Physical
Operating Temperature: 0 C to 50 C (32 F to 122 F)
Storage Temperature: -40 C to 70 C (-40 F to 158 F)
Humidity: 85% max. relative humidity (non-condensing)
Vibration to IEC 68-2-6: Operational 5 to 150 Hz, 2 g.
Shock to IEC 68-2-27: Operational 30 g (10 g relay).
Altitude: Up to 2000 meters
Construction: NEMA 4X/IP65 outdoor use, IP20 Touch Safe, Installation Category II,
Pollution Degree 2, One piece bezel/case; flame resistant; Synthetic rubber keypad;
panel gasket & mounting clip
Connection: High Compression Cage-Clamp Terminal Block
Wire Strip Length: 0.3" (7.5 mm)
Wire Gage: 30-14 AWG copper wire
Torque: 4.5 inch-lbs (0.51 N-m) max.
Dimensions: 1.95" x 3.8" x 4.2"
|
|
|
 |
|
 |
|
