 |
 |
 |
|
The Red Lion PAXCK110 PAX series panel meter is a timer with real-time clock capability. It has a 6 digit, green LED display in a 1/8 DIN housing. Communication and bus capabilities is made possible by option cards, which includes RS232, RS485, Modbus, DeviceNet, and Profibus-DP. DC powered. Switch contacts or CMOS & TTL circuit outputs are both examples of acceptable input sources. Three of the five function keys on the front panel are programmable to meet the needs of the application. Four setpoint outputs are provided through the use of an optional digital output card.
Features
- 1/8 DIN Housing
- 6 Digit, Green LED Display
- Elapsed Timer w/Preset Capability
- Real-Time Clock
- 4 Displays- Timer, Clock, Date, Counter
- Cycle Counting Capability
- Programmable Function Keys/User Inputs
- 4 Setpoint Alarm Outputs (w/Option card)
- Communication & Bus Capability (w/Option card)
- Crimson Programming Software
- NEMA 4X/IP65 - Front Panel
- Parameters can be partially or completely locked after setup to avoid tampering
Red Lion PAX Series Timer User Manual
Specifications
Display
6 digit, 0.56" (14.2 mm) standard green LED
Annunciators:
TMR- Timer, CNT- Cycle Counter, DAT- Real time clock date or time
SP1 - setpoint 1 output state, SP2 - setpoint 2 output state, SP3 - setpoint 3 output state, SP4 - setpoint 4 output state
Power Requirements
DC Power: 11 to 36 VDC, 14 W
(Derate operating temperature to 40 C if operating <15 VDC and three Option cards are installed)
AC Power: 24 VAC, +/-10%, 50/60 Hz, 15 VA
Isolation: 500 Vrms for 1 min. to all inputs and outputs
Sensor Power
12 VDC, +/-10%, 100 mA max. Short circuit protected
Memory
Nonvolatile E2PROM retains programmable parameters & display values
User Inputs
Three programmable user inputs
Logic inputs configurable as Current Sinking (active low) or Current
Sourcing (active high) through a single plug jumper.
Current Sinking (active low): VIL = 0.9 V max., 22 KOhm pull-up to +12 VDC.
Current Sourcing (active high): VIH = 3.6 V min., 22 KOhm pull-down, Max.
Continuous Input: 30 VDC.
Isolation To Timer Input Common: Not isolated
Response Time: 10 msec
Timer Display
Timer Range: 23 Selectable Ranges
Timing Accuracy: +/-0.01%
Minimum Digit Resolution: 0.001 Sec.
Maximum Least Significant Digit Resolution: 1 Hr.
Maximum Display: 999999
Real Time Display
5 display formats
Hr/Min/Sec (12 or 24 Hr. format); Hr/Min (24 Hr.); Hr/Min (12 Hr. with
or without AM/PM indication)
Date Display: 7 display formats
Month/Day or Day/Month (numeric or 3-letter Month format); Month/
Day/Year or Day/Month/Year (all numeric);
Day of Week/Day (3-letter Day of Week format)
Cycle Counter Display
Counter Range: 0 to 999999
Digit Resolution: 1 cycle
Maximum Count Rate: 50 Hz
Timer Inputs A & B
Logic inputs configurable as Current Sinking (active low) or Current
Sourcing (active high) via a single plug jumper.
Current Sinking (active low): VIL = 0.9 V max., 22 KOhm pull-up to +12 VDC.
Current Sourcing (active high): VIH = 3.6 V min., 22 KOhm pull-down, Max.
Continuous Input: 30 VDC.
Timer Input Pulse Width: 1 msec min.
Timer Start/Stop Response Time: 1 msec max.
Filter: Software filtering provided for switch contact debounce. Filter
enabled or disabled through programming.
If enabled, filter results in 50 msec start/stop response time for successive
pulses on the same input terminal
Standards Compliance
CE Approved
EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
EN 61010-1: General Requirements
EN 61010-2-030: Particular Requirements for Testing and Measuring Circuits
RoHS Compliant
UL Recognized Component: File #E179259
UL Listed: File #E137808
Type 4X Enclosure rating (Face only)
IP65 Enclosure rating (Face only)
IP20 Enclosure rating (Rear of unit)
Physical
Operating Temperature: 0 C to 50 C (32 F to 122 F)
Storage Temperature: -40 C to 60 C (-40 F to 140 F)
Humidity: 85% max. relative humidity (non-condensing)
Vibration to IEC 68-2-6: Operational 5 to 150 Hz, 2 g.
Shock to IEC 68-2-27: Operational 25 g (10 g relay).
Altitude: Up to 2000 meters
Construction: NEMA 4X/IP65 outdoor use, IP20 Touch Safe, Installation Category II,
Pollution Degree 2, One piece bezel/case; flame resistant; Synthetic rubber keypad; panel gasket & mounting clip
Connection: High Compression Cage-Clamp Terminal Block
Wire Strip Length: 0.3" (7.5 mm)
Wire Gage: 30-14 AWG copper wire
Torque: 4.5 inch-lbs (0.51 N-m) max.
Dimensions: 1.95" x 3.8" x 4.2"
This panel meter operates as an elapsed or preset timer as well as a clock, with both operations being in use at once. The display shows four different parameters, including the timer, count, date, and real time clock. There are two inputs with 23 timing ranges, with the ability for dual or quad output timer by using an option card. When used as a clock, the time can be shown in 12 or 24 hour formatting, indicating hours and minutes, or hours, minutes, and seconds. The 12 hour format has the option to show AM or PM if necessary. Date display shows the day, month, and year. Date or time changes for leap years or Daylight Savings Time are automatically set. When using multiple PAXCK units, they can sync up with each other, so all meters throughout the workplace can display the same time. The time clock card is battery operated, so it can show the current time even without the use of main power.
|
|
|
 |
|
 |
|
