The Red Lion PAXCDS20 is a quad setpoint relay output option card. It is for use only with PAX series Red Lion panel meters, and has a contact rating of 3 AMP @ 120/240 VAC or 28 VDC. PAX series panel meters have slots for option cards in three different categories: serial communications, analog output, and setpoint output. Only one option card from each category can be used in the panel meter at a time.

Specifications

• Response Time- 200 msec. max. to within 99% of final readout value
  (digital filter and internal zero correction disabled) 700 msec. max.
  (digital filter disabled, internal zero correction enabled)
  PAXH panel meter only: 1 sec. max. to within 99% of final readout value (digital filter disabled)
  PAXT panel meter only: 200 msec. typ.; 700 msec max. (digital filter disabled)
• Type- Four form A relays
• Isolation to Sensor & User Input Commons- 2300 Vrms for 1 minute
• Contact Rating- One Relay Energized: 3 amps @ 250 VAC or 30 VDC (resistive load).
  Total Current With All Four Relays Energized not to exceed 4 amps
• Life Expectancy- 100 K cycles min. at full load rating. External RC
  snubber extends relay life for operation with inductive loads

• PAXH Panel Meter Isolation- Isolation To Sensor Common: 1400 Vrms for 1 min.
  Isolation To User Input Common: 500 Vrms for 1 min

Red Lion PAX CDS Setpoint Option Card User Manual

Quad Setpoint Relay Option Card PAXCDS20