The Red Lion PAXCDS10 is a dual setpoint relay output option card. It is made for PAX series Red Lion panel meters with a contact rating of 5 AMP @ 120/240 VAC or 28 VDC. PAX series panel meters have slots for option cards in three different categories: serial communications, analog output, and setpoint output. Only one option card from each category can be used in the panel meter at a time.

Specifications

• Response Time- 200 msec. max. to within 99% of final readout value
  (digital filter and internal zero correction disabled) 700 msec. max.
  (digital filter disabled, internal zero correction enabled)
  PAXH panel meter only: 1 sec. max. to within 99% of final readout value (digital filter disabled)
  PAXT panel meter only: 200 msec. typ.; 700 msec max. (digital filter disabled)
• Type- Two form C relays
• Isolation to Sensor & User Input Commons- 2000 Vrms for 1 minute
• Contact Rating- One Relay Energized: 5 amps @ 120/240 VAC or 28 VDC (resistive load).
  Total Current With Both Relays Energized not to exceed 5 amps
• Life Expectancy- 100 K cycles min. at full load rating. External RC
  snubber extends relay life for operation with inductive loads

• PAXH Panel Meter Isolation- Isolation To Sensor Common: 1400 Vrms for 1 min.
  Isolation To User Input Common: 500 Vrms for 1 min

Red Lion PAX CDS Setpoint Option Card User Manual

PAX Series Dual Setpoint Relay Option Card PAXCDS10