 |
 |
 |
|
The Red Lion PAXC0130 PAX series panel meter is a dual counter with a 6 digit, green LED display in a 1/8 DIN housing. The display features 0.56" numbers. Compatible inputs come from various sources, such as switch contacts, CMOS & TTL circuit outputs, magnetic pickups, and RLC sensors. It accommodates directional, uni-directional, & Quadrature signals. The front panel has 5 keys, with 3 of them being programmable function keys. DC powered
Features
- 1/8 DIN Housing
- 6 Digit, Green LED Display
- Up to 3 Count Displays
- Programmable Scale Factors
- Programmable Function Keys/User Inputs
- Four Setpoint Alarm Outputs (w/ Option card)
- Dual Count Quad Inputs
- NEMA 4X/IP65 - Front Panel
- Adjustable Brightness Intensity to Fit Surrounding Conditions
Red Lion PAX Series User Manual
Specifications
Display
6 digit, 0.56" (14.2 mm) standard green LED
Annunciators:
A - Counter A, B - Counter B, C - Counter C - Upper significant digit display of counter
SP1 - setpoint 1 output state, SP2 - setpoint 2 output state, SP3 - setpoint 3 output state, SP4 - setpoint 4 output state
Power Requirements
DC Power: 11 to 36 VDC, 14 W
(derate operating temperature to 40 C if operating <15 VDC and three plug-in option cards are installed)
AC Power: 24 VAC, +/- 10%, 50/60 Hz, 15 VA
Isolation: 500 Vrms for 1 min. to all inputs and outputs (50 V working)
Sensor Power
12 VDC, +/-10%, 100 mA max. Short circuit protected
Memory
Nonvolatile memory retains programmable parameters & display values
User Inputs
Three programmable user inputs
Max. Continuous Input: 30 VDC
Isolation To Sensor Input Commons: Not isolated
Logic State: Jumper selectable for sink/source logic
Response Time: 6 msec. typical; function dependent.
Output
Response Time: 25 microsec.; add 6 msec (typical) if a relay card is installed
Timed Output Accuracy: Counter = +/- 0.01% + 10 msec.
Standards Compliance
CE Approved
EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
EN 61010-1: General Requirements
EN 61010-2-030: Particular Requirements for Testing and Measuring Circuits
RoHS Compliant
UL Recognized Component: File #E179259
UL Listed: File #E137808
Type 4X Enclosure rating (Face only)
IP65 Enclosure rating (Face only)
IP20 Enclosure rating (Rear of unit)
Physical
Operating Temperature: 0 C to 50 C (32 F to 122 F)
Storage Temperature: -40 C to 60 C (-40 F to 140 F)
Humidity: 85% max. relative humidity (non-condensing)
Vibration to IEC 68-2-6: Operational 5 to 150 Hz, 2 g.
Shock to IEC 68-2-27: Operational 25 g (10 g relay).
Altitude: Up to 2000 meters
Construction: NEMA 4X/IP65 outdoor use, IP20 Touch Safe, Installation Category II,
Pollution Degree 2, One piece bezel/case; flame resistant; Synthetic rubber keypad; panel gasket & mounting clip
Connection: High Compression Cage-Clamp Terminal Block
Wire Strip Length: 0.3" (7.5 mm)
Wire Gage: 30-14 AWG copper wire
Torque: 4.5 inch-lbs (0.51 N-m) max.
Dimensions: 1.95" x 3.8" x 4.2"
Four setpoint outputs can be provided for the meter through an optional digital output plug in card. The parameter list can be locked either completely, or with only the setpoints available after setup. This panel meter is perfect for use under the demanding conditions of the industrial environment. It should not be used to directly command motors, valves, and actuators without safeguards.
|
|
|
 |
|
 |
|
