 |
 |
 |
|
The Red Lion C48CB003 C48 series panel meter is a batch counter with 1 NPN OC and 2 relay outputs. It features a 2 line, 6 digit, reflective LCD display with 1/16 DIN housing. It has a main process counter with dual presets and a second counter with one preset. The second counter can be used as a batch or total counter. A reflective display indicates positive lit numbers on a negative background. It is also resistant to noise interference, making it ideal for industrial use. AC powered.
Features
- Three Presets
- Bi-directional & Quadrature Counting
- Dual Line, 6 Digit LCD Reflective Display
- 1 NPN OC / 2 Relay Outputs
- Up to 11KHz
- NEMA 4X/IP65 - Front Panel
- Field Replaceable Relay Output Board
- Status Indicators for Outputs
- Programmable User Inputs
- Function Keys on Front Panel
- Lightweight Housing Withstands Impact
- Can Be Stacked Horizontally or Vertically
Red Lion C48C Series User Manual
Specifications
Display
Main Display: 0.3" digits
Secondary Display: 0.2" digits
Annunciators: Value- PRS, 1, 2, & 3; Output- 01, 02, 03
Power Requirements
AC Power: 85-250 VAC, 50/60 Hz, 9 VA max
DC Power: 11-14 VDC @ 150 mA max
Memory
Nonvolatile E2PROM retains all programmable parameters and count values
Sensor Power
+12 VDC (+/- 15%) @100 mA max
Count Inputs A & B
Current Sourcing: 3.9KOhm pull-down, VIN max = 30 VDC
Current Sinking: 7.8KOhm pull-up to 12 VDC; ISNK = 1.8 mA max
Debounce: 50 Hz max
Lo Bias: VIL = 1.5 VDC max., VIH = 3.75 VDC min.
Hi Bias: VIL = 5.5 VDC max., VIH = 7.5 VDC min
User Inputs
Current Sinking: VIL = 1.5 VDC max, 22 KOhm pull-up to 5 VDC
Current Sourcing: VIH = 3.5 VDC min., VIN max = 30 VDC; 22 KOhm pulldown
Response Time: 10 msec max.
Inhibit Response Time: 250 usec max.
Outputs
Solid State: NPN Open Collector- ISNK = 100 mA max. @ VOL = 1.1 VDC max.; VOH = 30 VDC max.
Relay: Form A contact, Rating = 5 A @ 250 VAC, 30 VDC (resistive load), 1/10 HP @ 120 VAC (inductive load)
Relay Life Expectancy: 100,000 cycles min. at max. load rating
Standards Compliance
UL & CUL Recognized
Electrostatic Discharge: EN 61000-4-2
Electromagnetic RF Fields: EN 61000-4-3
Fast Transients (burst): EN 61000-4-4
RF Conducted Interference: EN 61000-4-6
Simulation of Cordless Phone: ENV 50204
RF Interference: EN 55011
Physical
Operating Temperature: 0 C to 50 C (32 F to 122 F)
Storage Temperature: -40 C to 70 C (-40 F to 158 F)
Humidity: 85% max. relative humidity (non-condensing) from 0 C to 50 C.
Altitude: Up to 2000 meters
Housing: Black Plastic
Electrical Connection: Wire clamping screw terminals
Dimensions: 1.95" x 1.95" x 4.54"
There are nine programmable counting modes & the panel meter can be programmed to register counts on both edges of the input signal. Operations such as programming modes & data values, changing the display, and resetting can all be done through the function keys located on the front. User inputs can be sinking (active low) or sourcing (active high) through a single plug jumper. It features relay outputs for Output 2 and Output 3. Output 1 is solid-state NPN current sinking, open collector. Output 1 and Output 2 are for the primary process counter, while Output 3 is for the secondary batch or total counter.
|
|
|
 |
|
 |
|
