Home > Surplus Inventory >

Red Lion Single Shaft Length Sensor, 1 PPR

Red Lion Single Shaft Length Sensor
Red Lion ZFG0001C Single Shaft Length Sensor, 1 PPR
  
Alternative Views:
Price: $391.00
MFG P/N: ZFG0001C
MFG: Red Lion
Weight (lbs): 10

Quantity in Stock :1


Availability: In Stock
Product Code: ZFG0001C
Qty:

Description
 

The Red Lion ZFG0001C single ended shaft length sensor has a rate of 1 PPR (pulses per revolution), or, an output pulse rate of 1 pulse per foot. It has a cast aluminum housing with a stainless steel handle tube and 10 feet of 3 wire shielded cable. It can be used with the Red Lion length sensor hinge clamp assembly or a measuring wheel for precise length measurement.

Features

  • 1 PPR (pulses per revolution)
  • Aluminum housing
  • Sealed ball bearings
  • 3/8" diameter stainless steel shaft
  • Single channel output
  • Includes 10 foot, 3 wire cable
  • Hinge clamp assembly and measuring wheels not included

Specifications

  • Dimensions- 8.32" Length x 2.75" Width x 2.85" Depth
  • Weight (not including cable)- 1.38 lb
  • Pulse Rate- 1 PPR, 1 pulse per foot
  • Supply Voltage- 8-35V DC (including power supply ripple) @ 50mA max. (30 mA typ.); Reverse polarity protected
  • Outputs- NPN Open Collector Transistor; VOH = 30 VDC max., VOL = 1 V max. @ 40 mA Output current is limited to 40 mA
  • Output Frequency- Up to 10 KHz
  • Cable Connections- Red- +VDC, Black- Common, White- NPN OC Output
  • Max Speed- 6000 RPM
  • Radial Shaft Load- 15 lbs max. (66.7N)
  • Axial Shaft Load- 15 lbs max. (66.7N)
  • Starting Torque- 3 oz.-in. (21.2N-mm)
  • Moment of Inertia- 2.82 x 10^-4 oz. - in. - sec.^2 (1.99 x 10^-3N - mm - sec^2)
  • Operating Temperature- -18 C to 60 C (-0.4 F to 140 F)

Red Lion ZFG0001C User Manual

Red Lion Single Shaft Length Sensor, 1 PPR
Additional Product Information

This length sensor should be installed so the measuring wheel contact ribbon, strip or web as it passes over a roller. The weight of the sensor offers traction, with the arm angle not going over 30 degrees from the horizontal. Wheels can lift due to tension on the signal cable. The cable should be clamped to a machine frame with enough room to be slack.