 |
 |
 |
|
The Red Lion N-Tron
® Series 526FXE2-SC-15 26 Port 19 inch rackmount Industrial Ethernet Switch offers outstanding performance and ease of use. Made for connecting Ethernet enabled industrial & security equipment, the 526FXE2-SC-15 features 15km singlemode fiber optic cable with an SC style connector.
Note: ST model pictured
PRODUCT FEATURES
- Full IEEE 802.3 and 1613 Compliance
- NEMA TS1/TS2 Compliance
- (24) 10/100 BaseTX RJ-45 Ports
- (2) 100BaseFX Ports, SC
- Auto Sensing 10/100BaseTX, Duplex, and MDIX
- Store-and-forward Technology
- Up to 2.6 Gb/s Throughput
- Rugged Industrial 19" Rackmount Enclosure
- Redundant Power Inputs (10-30 VDC)
- Bi-Color LED's For Link, Speed, Activity & Duplex Status
The N-TRON 526FXE2-SC-15 is designed to operate in industrial environments. It is housed in a rugged steel enclosure. The 526FXE2-SC-15 also comes standard with extended temperature rating, extended shock and vibration specs, redundant power inputs, and a high MTBF (greater than 1M hours). The N-TRON 526FXE2-SC-15 requires no setup unless the advanced port functions are utilized. The twenty-four 10/100BaseTX ports are auto sensing and auto configuring. Each copper port is automatically negotiated for maximum speed and performance by default. The fiber optic ports support full 200Mb/s communications via 100BaseFX. Bi-color LED's are provided to display the link status, link speed and activity of each port as well as power on/off status. The N-TRON 526FXE2-SC-15 uses "state of the art" IEEE 802.3 Fast Ethernet 10/100BaseTX switching technology. This eliminates network collisions and increases network determinism. 4,000MAC addresses are supported enabling sophisticated and complex network architectures. A high speed processor and backplane allows wire speed capability on all ports simultaneously. The 526FXE2-SC-15 can also be panel mounted.
Red Lion N-Tron Series 526FX2 User Manual
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
Switch Properties
Number of MAC Addresses: 4,000
Aging Time: 20
Latency Typ.: 2.1 µs
Switching Method: Store & Forward
Physical
Height: 1.75" (4.46 cm)
Width: 19" (48.26 cm)
Depth: 4.35" (11.04 cm)
Weight: 3.7 lbs
Fiber Length: 15km
Electrical
Redundant Input Voltage: 10-30 VDC
Input Current: 1A@24V
BTU/hr: 81.9@24V DC
Inrush: 9.5Amp/0.75ms@24V
N-Tron Power Supply: NTPS-24-3 (3A@24V DC)
Environmental
Operating Temperature: -40 C to 85 C
Operating Humidity: 10% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock and Vibration (bulkhead mounting)
Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
MTBF: >1Million Hours
Network Media
10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable
100BaseFX
Singlemode: 7-10/125 µm
Connectors
10/100BaseTX: Twenty-four RJ-45 Copper Ports
100BaseFX: Two SC Duplex Ports
Serial Configuration Port
Com Parameters: 9600,n,8,1
|
|
|
|
|
|
|
