The Red Lion N-Tron® Series CAT5E-X-250 gray twisted pair CAT5E cable has an RJ-45 connector with strain relief boots. It is intended to meet the requirements of industrial networks, whether it is 10Base-T, 100Base-TX or 1000Base-TX. Please note that shielding is only present at one end of the cable. That end should be implemented at the switch end to prevent ground loops. Length: 250 FT
RJ45 Plug Features
- Connector type: Shielded RJ45 plug
- 4 pair unshielded twisted pair cable
- RJ45 Contact material: phosphor bronze
- RJ45 Contact plating: gold 1.3 um (50u")
- RJ45 Contact under-plating: nickel
- RJ45 Housing material: polycarbonate, UL94V-0
- Durability/Mating cycles: 500 cycles minimum
- Max. current: 1.5 A
- Max. voltage: 125 V
- Withstand voltage: 1000 VAC
- Contact resistance: 20 milliohms maximum
- Insulation resistance: 500 megohms minimum
- 24 AWG tinned copper conductor (0.25mm2)
- ELV and RoHS compliant
- UL, CSA, and CE approvals
N-TRON CAT5E-X-250 250 Foot Cat5E Cable with RJ45
Physical Properties
Cable Insulation outer diameter: 0.04" (1 mm) nominal
Cable Insulation material: cellular polyethylene (PE)
Cable Inner shield material & coverage: polyester-aluminum, 100%
Cable Outer shield material & coverage: tin copper braid, 80%
Cable Jacket material: special yellow polyurethane (FR-PU)
Outer diameter: 0.28" (7.1 mm) nominal
Installation Min. bend radius: 2.7" (67 mm) ( 9.5 x OD)
Operation Min. bend radius: 1.4" (35 mm) (5.1 x OD)
Operating temperature: -50 C to 85 C (-58 F to 185 F)
Installation temperature: -10 C to 70 C (14 F to 158 F)
Electrical Properties
DC resistance: 96 Ohms/Km @ 20 C
Impedance: 100 +/- 15 Ohms (1-100 MHz)
Capacitance: 46 pF/m nominal @ 1 KHz
Rated voltage: 230 Vrms
Dielectric strength: 700 VAC/1 minute
Insulation resistance: 5000 MOhm-Km minimum
|