The Red Lion N-Tron® Series CAT5E-X-18 twisted pair Ethernet cable has an RJ-45 connector with strain relief boots. It is intended for use mainly in industrial networks, whether its 10Base-T, 100Base-TX or 1000Base-TX. Keep in mind that the shielding is only on one end of the cable. This end should be implemented at the switch end to prevent ground loops. Color: Gray. Length: 18 FT
RJ45 Plug Features
- Connector type: RJ45 plug, shielded
- 4 pair twisted pair cable, unshielded
- RJ45 Contact material: phosphor bronze (CuSn)
- RJ45 Contact plating: gold (Au) 1.3 um (50u")
- RJ45 Contact under-plating: nickel (Ni)
- RJ45 Housing material: polycarbonate, UL94V-0
- Durability/Mating cycles: 500 cycles minimum
- Max. current and voltage: 1.5 A and 125 V
- Withstand voltage: 1000 VAC
- Contact resistance: 20 milliohms maximum
- Insulation resistance: 500 megohms minimum
- 24 AWG tinned copper conductor (0.25mm2)
- ELV and RoHS compliant
- UL, CSA, and CE approvals
RJ45 Twisted Pair Ethernet Cable
Physical Properties
Cable Insulator size: OD 0.04" (1 mm) nominal
Cable Insulator material: cellular polyethylene (PE)
Cable Inner shield material: polyester-aluminum, 100% coverage
Cable Outer shield material: tin copper braid, 80% coverage
Cable Jacket material: special yellow polyurethane (FR-PU)
Outer diameter: 0.28" (7.1 mm) nominal
Min. bend radius, installation: 2.7" (67 mm) ( 9.5 x OD)
Min. bend radius, operation: 1.4" (35 mm) (5.1 x OD)
Operating temperature: -50 C to 85 C
Installation temperature: -10 C to 70 C
Electrical Properties
DC resistance: 96 Ohms/Km @ 20 C
Impedance: 100 +/- 15 Ohms (1-100 MHz)
Capacitance: 46 pF/m nominal @ 1 KHz
Rated voltage: 230 Vrms
Dielectric strength: 700 VAC/1 minute
Insulation resistance: 5000 MOhm-Km minimum
|
