The Menics PWECF-202-RG 2 stack LED tower light has a low profile chrome finish housing and is rated for 24V. It has red & green lenses, with a steady & flashing light. Made for wall mounting, either horizontally or vertically. The signal light itself comes pre-wired with 800 mm (31.5") lead wire. Provides an equal brightness at any angle due to the reflective structure inside the lens. Resistant to vibration & moisture. Useful in situations in which a pole mounted tower light would be impractical. Steady or flashing mode is chosen based on wiring (see wiring diagram). Note: wiring diagram shows version with alarm buzzer). Rated IP 65.

Specifications

• Mounting- Wall Mount
• Housing Material- Chrome Finish Plastic
• Lens Material- Polycarbonate Resin
• Light Operation- Steady & Flashing
• Power Supply- 24V AC/DC
• Current Consumption- 0.07 Amps (Red), 0.09 Amps (Green)
• LED Colors- Red & Green
• Number of LED Tiers- 2 Stack
• Dimensions- 194 mm Height x 90 mm Width x 40 mm Depth (7.64" x 3.54" x 1.57")
• Flash Rate- 80 times per minute
• Buzzer- None
• Vibration- 3mm @ 10-55Hz
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Ambient Humidity- 45-85% Relative Humidity
• Recommended Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 65 (Total protection from dust and water jets in any direction)
• Approvals- UL Listed, CE, RoHS

Menics PWECF-202-RG 2 Tier Red & Green 24V Chrome LED Signal Light