The Menics MWETB-300-RYG LED wall mount signal light with alarm has a low profile white plastic housing and is rated for 12-24V. It has red, yellow, & green LED colors behind a single clear lens, with a steady & flashing light. Made for wall mounting. The signal light itself comes pre-wired with 800 mm (31.5") lead wire. Color & light mode is chosen based on the wiring (see wiring diagram). The multi-channel split lens design allows two colors to be displayed on the signal light, with the top & bottom each showing a different color. The lens allows the LEDs to be seen from a distance. Rated IP 52.

Specifications

• Mounting- Wall Mount
• Housing Material- White Plastic with Clear Lens
• Lens Material- Polycarbonate Resin
• Light Operation- Steady & Flashing w/ Alarm
• Power Supply- 12-24V DC
• Current Consumption- 0.22 Amps
• LED Colors- Red Yellow & Green
• Dimensions- 194 mm Height x 90 mm Width x 40 mm Depth (7.64" x 3.54" x 1.57")
• Flash Rate- 80 times per minute (12V DC), 85 times per minute (24V DC)
• Buzzer Volume- 75 dB (at 1 Meter)
• Vibration Resistance- 0.75 mm @ 10-55Hz
• Dielectric Strength- 1000VAC 50/60Hz for 1min
• Insulation Resistance- 100 MΩ minimum (500VDC mega)
• Ambient Temperature- -20 C to 40 C (-4 F to 104 F)
• Storage Temperature- -20 C to 70 C (-4 F to 158 F)
• Ambient Humidity- 45-85% Relative Humidity
• Recommended Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 52 (Partial protection from dust and droplets up to 15 degrees from vertical)
• Approvals- UL Listed, CE, RoHS

Menics MWETB-300-RYG Split Lens 12-24V Wall Mount LED Signal Light