The Menics MSP-TBS-02-R is a red wall bracket mount alarm buzzer with a terminal connection and a rated voltage of 24V DC. Plays one of 3 siren sounds, depending on the connection (see diagram). Has a compact housing. Front panel is rated IP 65 which is perfect for environments with excess dirt, dust, or moisture. The one touch terminal block makes a crimping tool unnecessary. RoHS compliant.
Specifications
- Alarm Dimensions (with bracket)- 121.8 mm Width x 120.5 mm Height x 114 mm Length (4.8" x 4.74" x 4.5")
- Connection- Terminal (see MSP-LBS-02-R below for model with lead wire connection)
- Mounting- External (see MSP-TPS-02-R below for panel mount version)
- Sound Type- 3 Channel Siren (Fire Truck, Police Car, Ambulance) - see MSP-TBM-02-R below for 3 channel melody
- Rated Voltage- 24V DC
- Current Consumption- 0.4 Amp
- Alarm Housing Color- Red with Black Horn
- Housing Material- ABS Plastic Body with NBR Horn
- Max Volume- 110 decibels (1 Meter)
- Insulation Resistance- Over 100 MOhm (500V DC mega between terminal & case)
- Withstand Voltage- 500V AC 50/60Hz 1 min.
- Operating Temperature- -20 C to 50 C (-4 F to 122 F)
- Storage Temperature- -20 C to 65 C (-4 F to 149 F)
- Operating Humidity- 45-85% Relative Humidity
- Protection Rating- IP 65 (Total protection from dust and water jets from any direction)
- Approvals- RoHS Compliant
Installation: The alarm bracket is held in position by the two included M8 bolts. Bracket mounting holes are 50mm apart. Face the housing downwards if being mounted outside, to prevent water or debris from collecting in the speaker. When the bracket is secure, angle the speaker and tighten the adjustment bolts on the sides (tightening torque: 5-6N.m). Vibration absorbing rubber should be used if mounting in an area with a lot of vibration.
Menics 24V Red Terminal Connection Siren MSP-TBS-02-R
