The Menics MSP-TBM-02 is a white wall bracket mount alarm buzzer with a terminal connection and a rated voltage of 24V DC. Plays one of 3 melodies, depending on the connection (see diagram). Features integrated volume control and a compact housing. Front panel is rated IP 65, perfect for environments with excess dirt, dust, or moisture. The one touch terminal block makes a crimping tool unnecessary. RoHS compliant.
Specifications
- Alarm Dimensions (with bracket)- 121.8 mm Width x 120.5 mm Height x 114 mm Length (4.8" x 4.74" x 4.5")
- Connection- Terminal (see MSP-LBM-02 below for model with lead wire connection)
- Mounting- External (see MSP-TPM-02 below for panel mount version)
- Sound Type- 3 Channel Melody (For Elise, Home Sweet Home, Cuckoo Waltz) - see MSP-TBS-02 below for 3 channel siren
- Rated Voltage- 24V DC
- Current Consumption- 0.12 Amp
- Alarm Housing Color- White with Black Horn
- Housing Material- ABS Plastic Body with NBR Horn
- Max Volume- 100 decibels (1 Meter)
- Insulation Resistance- Over 100 MOhm (500V DC mega between terminal & case)
- Withstand Voltage- 500V AC 50/60Hz 1 min.
- Operating Temperature- -20 C to 50 C (-4 F to 122 F)
- Storage Temperature- -20 C to 65 C (-4 F to 149 F)
- Operating Humidity- 45-85% Relative Humidity
- Protection Rating- IP 65 (Total protection from dust and water jets from any direction)
- Approvals- RoHS Compliant
Installation: The alarm bracket is held in place by two M8 bolts, which are included. Bracket mounting holes are 50mm apart. If it is being mounted outdoors make sure the housing faces downwards to prevent water or anything else from collecting inside. Once the bracket is secure, angle the speaker as desired and then tighten the adjustment bolts on the sides (tightening torque: 5-6N.m). Please note that vibration absorbing rubber should be used if mounting in an area with a lot of vibration.
Menics 24V Ivory Terminal Connection Buzzer MSP-TBM-02
