The Menics MSP-LBS-01-R is a red wall bracket mount alarm buzzer with a lead wire connection and a rated voltage of 12V DC. Plays one of 3 siren sounds, depending on the wiring (see diagram). Front panel is rated IP 65, which is useful in environments with excess dust or moisture. Features space saving housing. RoHS compliant.
Specifications
- Alarm Dimensions (with bracket)- 121.8 mm Width x 120.5 mm Height x 114 mm Length (4.8" x 4.74" x 4.5")
- Connection- Lead Wire (see MSP-TBS-01-R below for model with terminal connection)
- Mounting- External (see MSP-LPS-01-R below for panel mount version)
- Sound Type- 3 Channel Siren (Fire Truck, Police Car, Ambulance) - see MSP-LBM-01-R below for 3 channel melody
- Rated Voltage- 12V DC
- Current Consumption- 0.8 Amp
- Alarm Housing Color- Red with Black Horn
- Housing Material- ABS Plastic Body with NBR Horn
- Max Volume- 110 decibels (1 Meter)
- Insulation Resistance- Over 100 MOhm (500V DC mega between terminal & case)
- Withstand Voltage- 500V AC 50/60Hz 1 min.
- Operating Temperature- -20 C to 50 C (-4 F to 122 F)
- Storage Temperature- -20 C to 65 C (-4 F to 149 F)
- Operating Humidity- 45-85% Relative Humidity
- Wire Size & Length- 2464 UL / 22 AWG, 6P, 450mm
- Protection Rating- IP 65 (Total protection from dust and water jets from any direction)
- Approvals- RoHS Compliant
Installation: The alarm bracket is held in place by two M8 bolts, which are included. Bracket mounting holes are 50mm apart. If it is being mounted outdoors make sure the housing faces downwards to prevent water or anything else from collecting inside. Once the bracket is secure, set the speaker to the desired angle and then tighten the adjustment bolts on the sides (tightening torque: 5-6N.m). Please note that vibration absorbing rubber should be used if mounting in an area with a lot of vibration.
Menics 12V DC Red External Mount Siren MSP-LBS-01-R
