The Menics PTE-SCF-502-RYGBC-B 5 stack LED tower light has a 56mm diameter and is rated for 24V. It has red yellow green blue & clear lenses with a steady & flashing light and is prewired with 25" lead. This PTE series direct mount light has a modular system, making it easier to switch out parts if needed. It has prism cut lenses for optimal light distribution. The tower light itself comes pre-assembled. Perfect for applications in factory automation. Steady or flashing mode depends on how it is wired (see wiring diagram). Rated IP 65.

Specifications

• Light Operation- Steady & Flashing
• Power Supply- 24V AC/DC
• Mounting/Connection- Direct Mount / Lead Wires (see mounting accessories below)
• Lead Length- 25"
• Lens Colors- Red Yellow Green Blue & Clear
• Number of LED Tiers- 5 Stack
• Dimensions (Tower Light Only)- 309 mm Height x 56 mm Diameter (12.17" x 2.2")
• Current Consumption- 0.033 Amps (Red) 0.027 Amps (Yellow) 0.042 Amps (Green Blue & Clear)
• Flash Rate- 80 times per minute
• Vibration- 0.75mm at 10-55Hz
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Storage Temperature- -40 C to 70 C (-40 F to 158 F)
• Ambient Humidity- 45-85% Relative Humidity
• Recommended Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 65 (Total protection from dust and water jets in any direction)
• Approvals- CE, UL, RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart

Menics PTE-SCF-502-RYGBC-B 5 Tier Flashing 24V LED Signal Tower Light