The Menics PRE-210-RY 2 stack LED tower signal light has a 56mm diameter and is rated for 110V AC. It has red & yellow lenses with a steady light. The PRE series uses prism cut PC plastic lenses that have an even distribution of light. The silver bands clearly define each tier. The tower light itself comes preassembled and prewired with a 25" lead. Rated IP 56. Optional 80 dB buzzer kit also available (Sold separately).

Mounting (See mounting accessories below)

Pole Mount: Pole + Base
Wall Mount: Pole + Wall Bracket (MAP-DS40), Pole + 70 mm Base + Wall Bracket (MAP-DS30 or MAM-DS28), or Threaded Pole + Wall Bracket (MAM-DS25)
Surface Mount: 22 mm Pole (MAP-0022) + Base or Threaded 43 mm Pole (MAP-M043). Threaded pole would be inserted into a pre-drilled hole using lock nuts on either side to tighten in place.
See our mounting accessories chart (link below description) to see which poles and bases are compatible
Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request

Specifications

Operation- Steady
Power Supply- 110V AC
Mounting/Connection- Pole Mount / Lead Wires (25" Lead Length)
Lens Colors- Red & Yellow
Lens Material- Polycarbonate
Number of LED Tiers- 2 Tiers
Dimensions (Tower Light Only)- 192 mm Height x 56 mm Diameter (7.56" x 2.2")
Current- 0.057 Amps
Insulation Resistance- 100MOhm min (500VDC mega)
Vibration- 10~55Hz, amplitude 0.75mm
Ambient Temperature- -15 C to 40 C (5 F to 104 F)
Storage Temperature- -15 C to 40 C (5 F to 104 F)
Recommended Wire Size- 1007 UL / 22 AWG
IP Protection- IP 56 (Protection from harmful dust deposits and powerful water jets from any direction)
Approvals- CE, RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart

PRE-210-RY 110V AC 2 Tier Red & Yellow LED Tower Signal Light