The Menics PMEB-502-RYGBC 5 stack LED tower signal light has a 45mm diameter and is rated for 24V. It has red, yellow, green, blue, & clear lenses, with a steady light and 80 dB buzzer alarm. Lenses are prism cut, to provide more even light distribution. This PME series lights feature a modular system, making it easier to switch out parts if necessary. The silver bands clearly define each stack. The signal light itself comes pre-assembled, with a 25" lead. It can be used in high vibration areas due to the vibration absorbing rubber embedded inside. Rated IP 50.

Mounting (See mounting accessories below)

• Pole Mount: Pole + Base
• Wall Mount: Pole + Wall Bracket
• Surface Mount: 22 mm Pole (MAP-0022) + Base or Threaded 43 mm Pole (MAP-M043). Threaded pole would be inserted into a pre-drilled hole using lock nuts on either side to tighten in place.
• See our mounting accessories chart (link below description) to see which poles and bases are compatible
• Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request

Specifications

• Light Operation- Steady
• Power Supply- 24V AC/DC
• Current Consumption- 0.06 Amps
• Lead Length: 25"
• LED Colors- Red/Yellow/Green/Blue/Clear
• Number of LED Tiers- 5 Stack
• Lens Material- Polycarbonate Resin
• Housing Material- ABS Plastic Resin
• Dimensions (Tower Light Only)- 287 mm Height x 45 mm Diameter (11.3" x 1.77")
• Buzzer Volume- 80 Decibels at 1 meter
• Vibration- 3 mm @10~55Hz
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Ambient Humidity- 45-85% Relative Humidity
• Recommended Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 50 (Protection from harmful dust deposits)
• Approvals- CE, RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart

Menics PMEB-502-RYGBC 5 Tier Red/Yellow/Green/Blue/Clear 24V Tower Light