The Menics PLDS-301-RYG 3 stack 12V LED tower light has a 25 mm diameter with red, yellow, & green lenses and a steady light. Lens is prism cut, to provide an even light distribution. This PLD series light has a 65 mm anodized aluminum body and is useful for small device applications. The signal light itself comes pre-assembled, with a lead wire connection. Lock nut and fixing bolt for direct surface mounting included. Rated IP 52.
Note: See the link to our accessory chart below the description to find out which mounting accessories are compatible with each other.
Specifications
- Mounting- Surface Mount or Wall Mount (See wall mount bracket below)
- Light Operation- Steady
- Power Supply- 12V DC
- Current Consumption- 0.21 Amps
- Lens Colors- Red Yellow Green
- Number of Tiers- 3 Stack
- Lens Material- Polycarbonate Resin
- Housing Material- Anodized Aluminum w/ ABS Plastic Cap
- Hardware- Aluminum Fixing Bolt & Steel Lock Nut
- Dimensions (Tower Light Only)- 209.5 mm Height x 25 mm Diameter (8.25" x 1")
- Buzzer- None
- Vibration- 0.75 mm @10~55Hz
- Ambient Temperature- -15 C to 40 C (5 F to 104 F)
- Storage Temperature- -20 C to 70 C (-4 F to 158 F)
- Insulation Resistance- Over 100 MOhm (500V DC mega)
- Ambient Humidity- 45-85% Relative Humidity
- Recommended Wire Size- 1007 UL / 22 AWG
- IP Protection- IP 52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
- Approvals- CE, RoHS Compliant
Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart
PLDS-301-RYG 12V 3 Tier Short Pole LED Tower Signal Light
