The Menics MT8B3AL-RYG 3 stack tower light has a 85mm diameter and is rated for 24V. It has red, yellow, & green lenses, with a steady light. Lens is prism cut, which evenly distributes the light. The signal light itself comes pre-assembled and pre-wired. It can be used around machines and in high vibration environments due to the vibration-absorbing rubber embedded inside. Uses incandescent bulbs (see below for optional LED bulbs). Rated IP 54. Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request. See the link to our accessory chart below the description to find out which mounting accessories are compatible with each other.

Specifications

Mounting- Pole Mount or Wall Mount (with pole) - see mounting accessories below
Light Operation- Steady
Power Supply- 24V AC/DC
Current Draw- 1.2 Amps
Lead Length- 25"
Lens Colors- Red/Yellow/Green
Lens Material- Polycarbonate Resin
Number of Tiers- 3 Stack
Dimensions (Tower Light Only)- 327 mm Height x 85 mm Diameter (12.87" x 3.35")
Vibration- 3 mm @10~55Hz
Ambient Temperature- -15 C to 40 C (5 F to 104 F)
Ambient Humidity- 45-85% Relative Humidity
Wire Size- 1007 UL / 22 AWG
IP Protection- IP 54 (Protected from harmful dust deposits and splashing water from any direction)
Approvals- RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart

Menics MT8B3AL-RYG 85mm 3 Tier Red Yellow Green 24V Tower Signal Light